Manufacturer Siemens Siplace Machine - SIEMENS FOIL INSRT GUIDE – 00343831S03 – RHSMT Detail:
SIEMENS other accessories in stock
| 00118526-01 | Additional mechanical PCB alignment for S-27 HM single conveyor: with this option PCBs with a length/width ratio >2/1 can be transported with the small side at the single conveyor belts into the placement area. This option is only available for single conveyor. | 00344065S03 | PCB-optical system KST |
| 00118527-01 | Long Board Support for SIPLACE S-27 HM Dual Conveyor: this Option supports PCB´s up to a size of 610mm x 216mm (380mm SC) (24 inch x 8.5 inch (15 inch SC)). This option can be only be used for dual conveyor. This Option must be ordered per conveyor lane. | 00344069-01 | DISTANCE PART FOR SMEMA 900 |
| 00118528-01 | Long Board Support for SIPLACE S-27 HM Single Conveyor: this Option supports PCBs up to a size of 610mm x 460mm (24 inch x 18 inch ). This Option must be ordered per conveyor lane.This option can only be used for single conveyor. Content: 2 supports long PCBs, 1 lifting table option SC. | 00344082-01 | BALLAST CIRCUIT REINFORCED SUPPLY |
| 00118530-01 | This item is required one time per SIPLACE S/F for installation of one or more PCB-barcode readers (1D-reader or 2D-reader heads). The following items are included: Mounting bracket (2 pcs), Distribution board (1 pcs), Assembly material and cabling. Additionally, one or more PCB Barcode Readers (item 119689 or 119682) are needed. | 00344104S02 | STRIP REMOVAL PLATE |
| 00119011-01 | Adapter device HS-xx changeover table with wheels from version 2 for reel holder (item no:141204) of 3x8mm feeders (item no:141098,141099). | 00344108S01 | WINDOW AXIS |
| 00119016-01 | Air filter box for SIPLACE HS-xx inclusive fan with increased power and covers with filter mat. 1 package per machine required. This package can be used for all machine types HS-50 and following. | 00344109S05 | LIFTING MAGNET cpl. used |
| 00119018-01 | With the Option Retrofit Vacuumpump HS-50 a SIPLACE HS-50 can be connected to an external Vacuumpump. This reduces the air consumption to 400 NI/min. To guarantee the specification of SIPLACE HS-50 the vacuumpump must fulfil the specification of Siemens. More details from the respective Sales or Service representative. | 00344204-04 | SERVO AMPLIFIER TBS200/10X1 |
| 00119022-02 | Component feeder changeover table, height 830-950mm, with integrated reel container. For SIPLACE HS-xx,both sides of the placement station. Integrated lifting device and wheels for short setup times. Component feeder capacity: 12 slots for 36 8mm tapes, when using 3x8mm feeder. | 00344205S04 | SERVO AMPLIFIER PC-BOARD TBS200/15Y1 |
| 00119078-01 | This item is required one time per SIPLACE HS-xx for extended Setup Verification with corded scanner. The following items are included: Corded Scanner (2 pcs). | 00344207-02 | BALLAST CIRCUIT BS200/1000 |
| 00119085-02 | Retrofitting kit 110/208V SIPLACE HS-xx | 00344215-01 | CABLE: ICOS-VIDEO CABLE S23 |
| 00119160-01 | One set of nozzle changers for 12-Segment Collect and Place Head HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A maximum of two for each gantry.Option includes: 4 nozzle changers with 5 magazines for 12 nozzles, 4 nozzle discarding devices. Station software version from 501.xx, line computer software version 501.xx. | 00344216-01 | CABLE: ICOS-VIDEO CABLE S23 |
| 00119161-01 | Nozzle changer for 12-Segment Collect and Place Head SIPLACE HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A maximum of two for each gantry. Option includes: 5 magazines, each for 12 nozzles. Station software version from 501.xx, line computer software version from 501.xx. | 00344220-01 | Cable Flash-Mode Portal-2 S23 |
| 00119162-01 | Additional set of nozzle changers for 12-Segment Collect and Place Head HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A maximum of two for each gantry. Option includes: 4 nozzle changers with 5 magazines for 12 nozzles, 4 nozzle discarding devices, 1 SLIO-module. Station software version from 501.xx. | 00344260-01 | Cable: Light Portal-1 S23 |
| 00119170-01 | Mechanical ceramic substrate centering for SIPLACE HS-50. The substrate is mechanically fixed in x-direction. To increase the placement accuracy the subtrate has to be centered optically using the PCB camera and proper fiducial marks. Substrate sizes: 50xmm x50mm (2 inch x 2 inch) to 100mm x 178mm (4 inch x 7 inch).Required minimum SW Version: 502.xx. | 00344269-01 | SOKO NOZZLE 7xx 2×1,6 |
| 00119185-02 | Retrofitting kit to 230/400V operating voltage for SIPLACE HS-xx/D4. Delivery as a part of station free of charge. Attention: If retrofitted at a customer a voltage savety check (DIN EN 60204) is necessary. For assistance plese ask SIPLACE SMT Service. | 00344482-02 | LIGHT TABLE WITH POWER SUPPLY |
| 00119405-01 | Long Board Option for SIPLACE HS-50: with this Option we can handle pcb’s up to 610mm x 460mm (24 inch x 18 inch) in the single conveyor mode. This option can be used for single and dual conveyor systems. | 00344485-09 | Processorboard 80C515C |
| 00119605S02 | Power Supply Conversion Instructions 110V for SIPLACE HF/X-Series. Attention: If retrofitted at a costumer a voltage savety check (DIN EN 60 204) is necessary. For assistance please ask SIPLACE SMT Service. | 00344488S03 | SM-Board modular |
| 00119610S02 | The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location 2 or 4. | 00344489-02 | Vision-Board modular |
| 00119619-01 | Measurement device for inspection of the coplanarity on the leads of IC. For use with Twin Head for SIPLACE HF and HF/3. SW 505 or higher. Only in the second placement area. | 00344637-01 | Comp. feed. changeov. table S20 cover |
| 00119621-01 | The Twin Head Re-Configuration Kit is necessary to exchange the actual Collect and Place Head,of the SIPLACE HF-Series,in a Twin Head. The Kit includes: 2 Pick and Place Modules, Stationer Component-Camera, a nozzle changer with 3 Dual Garage Magazine and 1 Single Garage Magazine, Cover, Head Servo Cards, Head Adapter board, Cables, additional parts, Tools for Head exchange, Box for replaced Head and a Technical Manual. With this kit the Head exchange can be performed by trained service personnel at customer side within 8 hours.The customer service isn’t included in this price. | 00344686-02 | ECCENTRIC Disc |
| 00119633S02 | The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location 1 or 3. | 00344687-02 | TRANSPORT PROTECTION |
| 00119654-01 | The Re-Configuration Kit Highforce Head is necessary to exchange the Collect and Place Head of a placement machine of SIPLACE HF-Series by an Highforce TwinHead. The Highforce TwinHead is a modified TwinHead, which is able to reach placement forces up to 30N (+/-15%) with SIPLACE HF-Series. The kit includes: two Highforce Pick and Place Modules, one stationary camera system, one nozzle changer with three standard magazines (dual garage) and one magazine for customized nozzles, head protection cover, servo-cards, head adaptor boards, cables, additional parts, one software CD, tools for head exchange, box for replaced head and a technical manual. Customer service is not included.Preconditions:Line software Siplace Pro 2.1SP2 or higher, Station software 505.03 or higher. | 00344689-01 | COMPONENTSTABLEACTUATOR |
| 00119665-01 | The 12-Segment Collect and Place Head Re-Configuration Kit is necessary to exchange the actual Placement Head of the SIPLACE HF and HF/3 (119600 and 119650) Placement Machine with Head Modularity, in a 12-Segment Collect and Place Head. The Kit includes: 12-Segment Collect and Place Head, Set Nozzles, Set Sleeves, Cover, Head Servo Cards, Head Adapter board, Cables, additional parts, Tools for Head exchange, Box for replaced Head and a Technical Manual. With this kit the Head exchange can be performed by trained service personnel at customer side within 8 hours. If required the automatic nozzle changer for the 12-Segment Collect and Place Head has to be ordered separately. | 00344692S01 | PROTCTIVE JACKET FOR RIBBON CABLE |
Product detail pictures:
Related Product Guide:
We insist on offering premium quality creation with very good company concept, honest product sales along with the finest and fast assistance. it will bring you not only the premium quality item and huge profit, but the most significant is to occupy the endless market for Manufacturer Siemens Siplace Machine - SIEMENS FOIL INSRT GUIDE – 00343831S03 – RHSMT , The product will supply to all over the world, such as: Belgium , Greece , Paris , When It produced, it making use of the world's major method for reliable operation, a low failure price, it appropriate for Jeddah shoppers choice. Our enterprise. s situated inside the national civilized cities, the website traffic is very hassle-free, unique geographical and financial circumstances. We pursue a "people-oriented, meticulous manufacturing, brainstorm, make brilliant" company philosophy. Strict good quality management, fantastic service, affordable cost in Jeddah is our stand around the premise of competitors. If needed, welcome to make contact with us by our web page or phone consultation, we'll be delighted to serve you.
By Marjorie
from Haiti
- 2017.11.29 11:09
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Hedy
from Finland
- 2018.12.28 15:18
Products categories
-
Phone
-
E-mail
-
Whatsapp
Whatsapp
-
WeChat
Judy
-
Top